Multiuser detection in a dynamic environment Part I: User identification and data detection

In random-access communication systems, the number of active users varies with time, and has considerable bearing on receiver's performance. Thus, techniques aimed at identifying not only the information transmitted, but also that number, play a central role in those systems. An example of application of these techniques can be found in multiuser detection (MUD). In typical MUD analyses, receivers are based on the assumption that the number of active users is constant and known at the receiver, and coincides with the maximum number of users entitled to access the system. This assumption is often overly pessimistic, since many users might be inactive at any given time, and detection under the assumption of a number of users larger than the real one may impair performance. The main goal of this paper is to introduce a general approach to the problem of identifying active users and estimating their parameters and data in a random-access system where users are continuously entering and leaving the system. The tool whose use we advocate is Random-Set Theory: applying this, we derive optimum receivers in an environment where the set of transmitters comprises an unknown number of elements. In addition, we can derive Bayesian-filter equations which describe the evolution with time of the a posteriori probability density of the unknown user parameters, and use this density to derive optimum detectors. In this paper we restrict ourselves to interferer identification and data detection, while in a companion paper we shall examine the more complex problem of estimating users' parameters.Comment: To be published on IEEE Transactions on Information Theor

Adaptive Interference Removal for Un-coordinated Radar/Communication Co-existence

Most existing approaches to co-existing communication/radar systems assume that the radar and communication systems are coordinated, i.e., they share information, such as relative position, transmitted waveforms and channel state. In this paper, we consider an un-coordinated scenario where a communication receiver is to operate in the presence of a number of radars, of which only a sub-set may be active, which poses the problem of estimating the active waveforms and the relevant parameters thereof, so as to cancel them prior to demodulation. Two algorithms are proposed for such a joint waveform estimation/data demodulation problem, both exploiting sparsity of a proper representation of the interference and of the vector containing the errors of the data block, so as to implement an iterative joint interference removal/data demodulation process. The former algorithm is based on classical on-grid compressed sensing (CS), while the latter forces an atomic norm (AN) constraint: in both cases the radar parameters and the communication demodulation errors can be estimated by solving a convex problem. We also propose a way to improve the efficiency of the AN-based algorithm. The performance of these algorithms are demonstrated through extensive simulations, taking into account a variety of conditions concerning both the interferers and the respective channel states

Co-existence Between a Radar System and a Massive MIMO Wireless Cellular System

In this paper we consider the uplink of a massive MIMO communication system using 5G New Radio-compliant multiple access, which is to co-exist with a radar system using the same frequency band. We propose a system model taking into account the reverberation (clutter) produced by the radar system at the massive MIMO receiver. Then, we propose several linear receivers for uplink data-detection, ranging by the simple channel-matched beamformer to the zero-forcing and linear minimum mean square error receivers for clutter disturbance rejection. Our results show that the clutter may have a strong effect on the performance of the cellular communication system, but the use of large-scale antenna arrays at the base station is key to provide increased robustness against it, at least as far as data-detection is concerned.Comment: To be presented at 2018 IEEE SPAWC, Kalamata, Greece, June 201

Joint Design of Overlaid Communication Systems and Pulsed Radars

The focus of this paper is on co-existence between a communication system and a pulsed radar sharing the same bandwidth. Based on the fact that the interference generated by the radar onto the communication receiver is intermittent and depends on the density of scattering objects (such as, e.g., targets), we first show that the communication system is equivalent to a set of independent parallel channels, whereby pre-coding on each channel can be introduced as a new degree of freedom. We introduce a new figure of merit, named the {\em compound rate}, which is a convex combination of rates with and without interference, to be optimized under constraints concerning the signal-to-interference-plus-noise ratio (including {\em signal-dependent} interference due to clutter) experienced by the radar and obviously the powers emitted by the two systems: the degrees of freedom are the radar waveform and the afore-mentioned encoding matrix for the communication symbols. We provide closed-form solutions for the optimum transmit policies for both systems under two basic models for the scattering produced by the radar onto the communication receiver, and account for possible correlation of the signal-independent fraction of the interference impinging on the radar. We also discuss the region of the achievable communication rates with and without interference. A thorough performance assessment shows the potentials and the limitations of the proposed co-existing architecture

Communications and Radar Coexistence in the Massive MIMO Regime: Uplink Analysis

This paper considers the uplink of a massive MIMO communication system using 5G New Radio-compliant multiple access, which is to co-exist with a radar system using the same frequency band. A system model taking into account the reverberation (clutter) produced by the radar system onto the massive MIMO receiver is proposed. In this scenario, several receivers for uplink channel estimation and data detection are proposed, ranging from the simple channel-matched beamformer to the zero-forcing and linear minimum mean square error receivers for clutter disturbance rejection, under the two opposite situations of perfectly known ad completely unknown clutter covariance. A theoretical analysis is also given, deriving a lower bound on the achievable uplink spectral efficiency and the mutual information between the input Gaussian-encoded symbols and the observables available at the communication receiver of the cellular massive MIMO system: regarding the latter, in particular, we show that, in the large antenna number regime, the radar clutter effects at the base station is suppressed and single-user capacity is restored. Numerical results, illustrating the performance of the proposed detection schemes, confirm the findings of the theoretical analysis, and permit quantifying the system robustness to clutter effect for increasing number of antennas at the base station.Comment: 15 pages, 8 figures, paper accepted for publication in IEEE Transactions on Wireless Communications. arXiv admin note: text overlap with arXiv:1805.0779

Using Massive MIMO Arrays for Joint Communication and Sensing

One of the trends that is gaining more and more importance in the field of beyond-5G and 6G wireless communication systems is the investigation on systems that jointly perform communication and sensing of the environment. This paper proposes to use a base station (BS), that we call \textit{radar-BS}, equipped with a large-scale antenna array to execute, using the same frequency range, communication with mobile users and sensing/surveillance of the surrounding environment through radar scanning. The massive antenna array can indeed both operate as a MIMO radar with co-located antennas -- transmitting radar signals pointing at positive elevation angles -- and perform signal-space beamforming to communicate with users mainly based on the ground. Our results show that using a massive MIMO radar-BS the communication and the radar system can coexist with little mutual interference.Comment: 5 pages, 4 figures, presented at 53th Asilomar conference, Nov. 201

Editorial

n/

Joint Design of surveillance radar and MIMO communication in cluttered environments

In this study, we consider a spectrum sharing architecture, wherein a multiple-input multiple-output communication system cooperatively coexists with a surveillance radar. The degrees of freedom for system design are the transmit powers of both systems, the receive linear filters used for pulse compression and interference mitigation at the radar receiver, and the space-time communication codebook. The design criterion is the maximization of the mutual information between the input and output symbols of the communication system, subject to constraints aimed at safeguarding the radar performance. Unlike previous studies, we do not require any time-synchronization between the two systems, and we guarantee the radar performance on all of the range-azimuth cells of the patrolled region under signal-dependent (endogenous) and signal-independent (exogenous) interference. This leads to a non-convex problem, and an approximate solution is thus introduced using a block coordinate ascent method. A thorough analysis is provided to show the merits of the proposed approach and emphasize the inherent tradeoff among the achievable mutual information, the density of scatterers in the environment, and the number of protected radar cells.Comment: Submitted to IEEE Transaction on Signal Processing on June 24, 201